Racing consumables

Items on this page are not available in or on-line shop, please phone free on 0800 8250824 to order

All prices shown are plus VAT @ 17.5%

Next day shipping from £2.00 + VAT

We can also supply capheads, hexheads, all types of locknuts, all thread, silver steel etc, please
complete an enquiry form or phone free on 0800 8250824

UNF rod ends Metric rod ends Spherical bearings Staking tools ALL types of bearing supplied - contact us Rubber boots Side spacers and top hat spacers Gearchange cables
Left Hand taps Threaded inserts Adjustable links Threaded rod r/h + l/h AN locknuts Locknuts
K Nuts Nut plates NAS Bolts Lambda bosses Pop rivets Wheel bearings

RUBBER BOOTS

Face Seal Style (Series: RS)

		Material: neoprene rubber Application: TO KEEP DIRT AND DEBRIS AWAY FROM ROD ENDS & TO PREVENT PREMATURE WEAR

Measurements for this series are in inches.

£ - p

Part Number

4.50

RS187

0.200

0.326

0.442

0.095

0.020

0.030

4.60

RS250

0.260

0.375

0.500

0.120

0.027

0.040

4.70

RS438

0.448

0.626

0.875

0.250

0.047

0.057

4.80

RS875

0.885

1.125

1.890

0.315

0.042

0.073

4.90

RS1000

1.010

1.230

2.100

0.500

0.05

5.00

RS312

0.322

0.487

0.700

0.200

0.047

0.057

5.10

RS375

0.385

0.530

0.800

0.220

0.047

0.057

5.20

RS500

0.510

0.730

1.125

0.250

0.047

0.067

5.30

RS625

0.635

0.882

1.235

0.267

0.047

0.067

5.40

RS750

0.760

1.006

1.381

0.367

0.047

0.062

BUSHING High Misalignment (Series: HMBZC)

		Material: low carbon steel, zinc plated clear Application: parts are assembled into spherical rod end bores to increase misalignment (also effectively reduces bore i.d.). Specials: available in any volume

Imperial & Metric but measurements for this series are in inches.

£ - p

Part Number

Fits Size

2.50

HMBZC-5-4

5/16

0.3085

0.339

0.468

0.534

0.334

0.437

0.255

0.04

0.06

0.200

0.309

0.065

2.70

HMBZC-6-4

3/8

0.371

0.396

0.562

0.590

0.358

0.5138

0.255

0.046

0.06

0.2315

0.356

0.083

2.70

HMBZC-6-5

3/8

0.371

0.396

0.562

0.590

0.358

0.5138

0.3175

0.046

0.06

0.2315

0.356

0.083

2.80

HMBZC-7-5

7/16

0.4335

0.433

0.625

0.659

0.397

0.5777

0.3175

0.06

0.075

0.2625

0.403

0.098

2.90

HMBZC-8-6

1/2

0.496

0.558

0.75

0.722

0.428

0.690

0.380

0.06

0.075

0.294

0.466

0.098

3.00

HMBZC-10-8

5/8

0.621

0.629

0.875

0.841

0.485

0.8019

0.505

0.075

0.09

0.3565

0.549

0.123

3.20

HMBZC-12-8

3/4

0.746

0.819

1.00

0.928

0.509

0.9776

0.505

0.075

0.09

0.419

0.656

0.091

3.20

HMBZC-12-10

3/4

0.746

0.819

1.00

0.928

0.509

0.9776

0.630

0.075

0.09

0.419

0.656

0.091

2.50

HMBZC-M8-M6

8mm

0.311

0.437

0.431

0.294

0.4036

0.2412

0.046

0.06

0.1365

0.256

0.063

2.70

HMBZC-M10-M6

10mm

0.3897

0.421

0.567

0.524

0.367

0.5244

0.2412

0.06

0.09

0.1562

0.315

0.073

2.70

HMBZC-M10-M8

10mm

0.3897

0.421

0.567

0.524

0.367

0.5244

0.320

0.06

0.09

0.1562

0.315

0.073

2.90

HMBZC-M12-M8

12mm

0.4665

0.488

0.625

0.563

0.387

0.589

0.320

0.06

0.09

0.176

0.354

0.069

2.90

HMBZC-M12-M10

12mm

0.4665

0.488

0.625

0.563

0.387

0.589

0.3987

0.06

0.09

0.176

0.354

0.069

THREADED INSERTS

Weldable "Thread Bungs" (Series: WTF)

		Material: chrome moly Application: thread bungs are typically welded into the end of a pipe or tubing. Parts are to only be welded by certified welders - not suitable for all applications. CAUTION: use weld-in threads with caution! Only certified welders should weld our WTF components. Amperage, voltage, wire feed, inductance settings, fillet size, etc. - all influence weld penetration and safety. Selection of the correct tube size, and suitability of a thread size for an application is the customer's sole responsibility. Use at your own risk.

Measurements for this series are in inches. Also available in Metric - Please ask

Many other sizes available

£ - p

Part Number

Thread

Fits Tube OD

Fits Tube Wall

3.00

WTF-3R-0.244

10-32 RH

0.244

0.375

0.465

0.06

0.375

0.75

0.375

0.058

3.00

WTF-3L-0.244

10-32 LH

0.244

0.375

0.465

0.06

0.375

0.75

0.375

0.058

3.25

WTF-4R-0.369

1/4-28 RH

0.369

0.500

0.4375

0.5275

0.06

0.4375

1.00

0.500

0.058

3.25

WTF-4L-0.369

1/4-28 LH

0.369

0.500

0.4375

0.5275

0.06

0.4375

1.00

0.500

0.058

3.25

WTF-4R-0.349

1/4-28 RH

0.349

0.500

0.4375

0.5275

0.06

0.4375

1.00

0.540

0.088

3.25

WTF-4L-0.349

1/4-28 LH

0.349

0.500

0.4375

0.5275

0.06

0.4375

1.00

0.540

0.088

3.50

WTF-5R-0.369

5/16-24 RH

0.369

0.500

0.4375

0.5275

0.06

0.500

1.25

0.500

0.058

3.50

WTF-5L-0.369

5/16-24 LH

0.369

0.500

0.4375

0.5275

0.06

0.500

1.25

0.500

0.058

3.50

WTF-5R-0.349

5/16-24 RH

0.349

0.500

0.4375

0.5275

0.06

0.500

1.25

0.540

0.088

3.50

WTF-5L-0.349

5/16-24 LH

0.349

0.500

0.4375

0.5275

0.06

0.500

1.25

0.540

0.088

3.75

WTF-6R-0.494

3/8-24 RH

0.494

0.625

0.500

0.590

0.06

0.625

1.5

0.625

0.058

ADJUSTABLE LINKS

Hex Bar Turnbuckles, Aluminum (Series: AHT)

		Length Determination: the dimensions below show what center-to-center length can be achieved by connecting the linkage length shown for male spherical rod ends. Material: aluminum. Specials: Also available in steel HBT series. Standards: connecting tube lengths available to provide fast and economical linkage options.

Measurements for this series are in inches. Also available in Metric - Please ask for quote

Other Thread Sizes: [ 10/32 • 1/4-28 • 5/16-24 • 3/8-24 • 1/2-20 • 5/8-18 • 3/4-16 ] Please ask for quote

£ - p Part Number Material Thread Thread Length Part Length Sphcl Rod End Assy Hex Size

5.00 AHT5-3.00 Aluminum 5/16-24 1.375 3.00 4.640 to 6.125 0.500 Hex

5.40 AHT5-4.00 Aluminum 5/16-24 1.500 4.00 5.640 to 7.125 0.500 Hex

5.80 AHT5-6.00 Aluminum 5/16-24 1.500 6.00 7.640 to 9.125 0.500 Hex

6.20 AHT5-8.00 Aluminum 5/16-24 1.500 8.00 9.640 to 11.125 0.500 Hex

6.60 AHT5-9.00 Aluminum 5/16-24 1.500 9.00 10.640 to 12.125 0.500 Hex

7.00 AHT5-10.00 Aluminum 5/16-24 1.500 10.00 11.640 to 13.125 0.500 Hex

7.40 AHT5-11.00 Aluminum 5/16-24 1.500 11.00 12.640 to 14.125 0.500 Hex

7.80 AHT5-13.00 Aluminum 5/16-24 1.500 13.00 14.640 to 16.125 0.500 Hex

8.20 AHT5-15.00 Aluminum 5/16-24 1.500 15.00 16.640 to 18.125 0.500 Hex

8.60 AHT5-16.00 Aluminum 5/16-24 1.500 16.00 17.640 to 19.125 0.500 Hex

9.00 AHT5-18.00 Aluminum 5/16-24 1.500 18.00 19.640 to 21.125 0.500 Hex

Stainless Steel Rod (Series: SSR)

		Application: Standard stainless steel connecting rods to compliment our line of spherical rod ends. Material: 300-series stainless steel Specials: we can form, machine or fabricate special configuration stainless steel rods in any volume. Sizes: Also available in economy low carbon steel in various lengths (2" - 24") and sizes from 10/32 to 3/4" and Metric 6, 8, 10, 12mm - Please ask

Measurements for this series are in inches. Also available in Metric - Please ask

£ - p Part Number Material Thread Thread Length Rod Length

6.20 SSR250-8.00 Stainless Steel 1/4-28 RH/RH 3.50 8.00

6.80 SSR250-12.00 Stainless Steel 1/4-28 RH/RH 4.00 12.00

8.40 SSR250-16.00 Stainless Steel 1/4-28 RH/RH 4.00 16.00

12.00 SSR250-20.00 Stainless Steel 1/4-28 RH/RH 4.00 20.00

8.00 SSR312-8.00 Stainless Steel 5/16-24 RH/RH 3.50 8.00

11.20 SSR312-12.00 Stainless Steel 5/16-24 RH/RH 4.00 12.00

16.40 SSR312-16.00 Stainless Steel 5/16-24 RH/RH 4.00 16.00

18.64 SSR312-20.00 Stainless Steel 5/16-24 RH/RH 4.00 20.00

21.00 SSR312-24.00 Stainless Steel 5/16-24 RH/RH 4.00 24.00

8.16 SSR375-8.00 Stainless Steel 3/8-24 RH/RH 3.50 8.00

11.50 SSR375-12.00 Stainless Steel 3/8-24 RH/RH 4.00 12.00

16.20 SSR375-16.00 Stainless Steel 3/8-24 RH/RH 4.00 16.00

18.64 SSR375-20.00 Stainless Steel 3/8-24 RH/RH 4.00 20.00

21.64 SSR375-24.00 Stainless Steel 3/8-24 RH/RH 4.00 24.00

16.88 SSR500-8.00 Stainless Steel 1/2-20 RH/RH 3.50 8.00

18.40 SSR500-12.00 Stainless Steel 1/2-20 RH/RH 4.00 12.00

20.40 SSR500-16.00 Stainless Steel 1/2-20 RH/RH 4.00 16.00

21.00 SSR500-20.00 Stainless Steel 1/2-20 RH/RH 4.00 20.00

21.50 SSR500-24.00 Stainless Steel 1/2-20 RH/RH 4.00 24.00

22.00 SSR625-8.00 Stainless Steel 5/8-18 RH/RH 3.50 8.00

23.00 SSR625-12.00 Stainless Steel 5/8-18 RH/RH 4.00 12.00

24.00 SSR625-16.00 Stainless Steel 5/8-18 RH/RH 4.00 16.00

24.00 SSR625-20.00 Stainless Steel 5/8-18 RH/RH 4.00 20.00

26.00 SSR625-24.00 Stainless Steel 5/8-18 RH/RH 4.00 24.00

'AN' LOCKNUTS

UNF - HIGHER STRENGTH AND THINNER THAN COMMERCIAL QUALITY LOCKNUTS.

RIGHT HAND

SIZE (INCH)

PRICE £

1/4

0.25

5/16

0.25

3/8

0.40

7/16

0.50

1/2

0.60

LEFT HAND

1/4

£0.50 EACH

LOCKNUT / HALFNUTS

COMMERCIAL QUALITY

UNF

RIGHT HAND

SIZE (INCH)

PRICE £ EACH

1/4

0.20

5/16

0.20

3/8

0.25

7/16

0.40

1/2

0.50

5/8

0.60

LEFT HAND

SIZE (INCH)

PRICE £ EACH

5/16

0.60

3/8

0.65

7/16

0.70

1/2

0.85

5/8

1.20

METRIC – ISO

RIGHT HAND

SIZE

PRICE £ EACH

M5

0.20

M6

0.25

M8

0.25

M10

0.25

M12

0.40

M16

0.50

LEFT HAND

SIZE

PRICE £

M5

0.35

M6

0.40

M8

0.40

M10

0.85

M12

0.85

M16

1.00

LOCKNUT WORKSHOP KITS

IMPERIAL (UNF) KIT 85 PIECES - £35

10 OFF EACH ¼, 5/16, 3/8, 7/16, ½ RIGHT HAND

5 OFF 5/8 RIGHT HAND

5 OFF EACH ¼, 5/16, 3/8, 7/16, ½, 5/8 LEFT HAND

METRIC (ISO) KIT 90 PIECES - £30

10 OFF EACH – M4, M5, M6, M8, M10, M12 RIGHT HAND

5 OFF M16

5 OFF EACH M6, M8, M10, M12, M16 LEFT HAND

COMBINED METRIC AND IMPERIAL - £52

10 OFF EACH ¼, 5/16, 3/8, 7/16, ½ RIGHT HAND

5 OFF EACH ¼, 5/16, 3/8, 7/16, ½ LEFT HAND

10 OFF EACH M6, M8, M10, M12 RIGHT HAND

5 OFF EACH M6, M8, M10, M12 LEFT HAND

K-NUTS Minimum standard H16-7 Max Temperature 280°c or 450°c high temp

UNF	Each	per 100
10/32 12PT	£0.32	£30.00
3/16 12PT	£0.32	£30.00
1/4 12PT	£0.40	£38.00
3/8" 12PT	£0.88	£86.00
4-40 6PT	£0.20	£19.00
6-32 6PT	£0.20	£19.00
8-32 6PT	£0.23	£21.00
10/32 6PT	£0.27	£26.00
3/16 6PT	£0.27	£26.00
1/4 6PT	£0.34	£32.00
5/16 6PT	£0.45	£43.00
3/8 6PT	£0.65	£63.00
7/16 6PT	£3.75	£355.00
1/2 6PT	£5.00	£470.00
5/8 6PT	£2.50
METRIC	Each	per 100
M3 x 0.50 6PT	£0.55	£53.00
M4 x 0.70 6PT	£0.55	£53.00
M5 x 0.80 6PT	£0.65	£63.00
M6 x 1.00 6PT	£0.75	£72.00
M8 x 1.25 6PT	£0.80	£76.00
M10 x 1.50 6PT	£1.20	£116.00

Other types/pitch available, please ask

WORKSHOP / TOOL BOX KITS OF K-NUTS

Please ask

NUT PLATES

	FIXED	FLOATING	CORNER	SINGLE LUG
8-32	£0.25	£0.40	£0.25	£0.25
10-32	£0.25	£0.40	£0.25	£0.25
¼UNF	£0.40	£0.40		£0.40

NUT PLATE KIT £33.00

125 piece nut plate kit. Sizes 8-32, 10-32 and ¼ with 3/32" CSK rivets.

Metric also available - please ask

NAS BOLTS

THESE ARE HIGH STRENGTH 8740 ALLOY STEEL BOLTS MADE TO NATIONAL AEROSPACE STANDARDS (NAS). THE TENSILE STRENGTH OF THE 1100 AND 1300 SERIES BOLTS IS 160,000 PSI IN TENSION AND 95,000 PSI IN SHEAR WITHOUT THE BRITTLENESS ASSOCIATED WITH INDUSTRIAL GRADE 12.9 CAP HEAD ALLEN BOLTS.

NAS BOLTS ARE SIZED FOR LENGTH BY GRIP OR PLAIN SHANK LENGTH IN 1/16” INCREMENTS DENOTED BY A NUMBER EG. -16 WHICH IS 16 X 1/16” = 1” OF PLAIN, LOAD BEARING SHANK.

THE DIAMETER IS ALSO GIVEN BY A NUMBER 03 IS 3/16”, 04 IS ¼” AND 05 IS 5/16” ETC.

THREADED LENGTH IS SPECIFIED BY THE FOLLOWING:-

1100 SERIES ARE SHORT THREAD LENGTH SUITABLE FOR A ‘K-NUT’ ONLY

1300 ARE STANDARD THREAD LENGTH FOR EITHER ‘NYLOC’ TYPE OR ‘K’ NUTS

6200 AND 6600 ARE STANDARD THREAD LENGTHS (AS 1300 SERIES) BUT THE BOLTS ARE STRONGER (180,000 PSI)

6300 IS A286 STAINLESS STEEL FOR BRAKE DISC TO BELL MOUNTING OR OTHER SIMILAR HIGH TEMPERATURE APPLICATION.

3/16

1303-1	6603-7	6603-15
1303-2	6203-9	6203-16
1103-3	6603-11	6603-17
6603-4D DRILLED HEAD		6203-23
6603-5D DRILLED THREAD		1303-23
6203-6		6603-26
ALL ABOVE £1.00ea	ALL ABOVE £1.25ea	ALL ABOVE £1.50 ea

1/4

6604-2	6304-9 STAINLESS STEEL	1104-21	1104-58
6604-4	1304-11	1304-22	1104-60
6204-5	1304-12D DRILLED HEAD	1104-23	6204-60
6204-6	1304-12	1104-24
1104-8	6204-14	1104-27
6204-9	1105-15	6204-30
	6204-15	1104-32
	6204-17	1304-34
ALL ABOVE £1.30 ea	ALL ABOVE £1.70 ea	ALL ABOVE £1.90 ea	ALL ABOVE £2.50 ea

5/16

1105-4	1105-21	1305-33	6605-54
1105-5	1105-23	1305-34	1305-60
1305-8	1105-27
6205-10	1305-17
6205-12 Drilled thread	1305-27
6205-13	1105-29
1105-13	6205-29
6205-14	1305-31
6205-15	1305-32
ALL ABOVE £2.00 ea	ALL ABOVE £2.20 ea	ALL ABOVE £2.75 ea	ALL ABOVE £4.00 ea

3/8

1106-8	1306-22	1306-35
1306-10	1306-25	1306-36
6606-10		1106-42
1106-12		1106-46
1306-14		1306-46
6206-15 Drilled thread		1106-54
1106-16
ALL ABOVE £2.20 ea	ALL ABOVE £3.00 ea	ALL THE ABOVE £4.00 ea

7/16

1307-5H DRILLED HEAD	1307-23	6607-27
1307-7	1107-24	1307-28
1106-16	6607-24	1107-29
1307-20	1107-25	1307-39
6207-22	1307-25
1107-22	6207-27
ALL ABOVE £2.50 ea	ALL ABOVE £4.00 ea	ALL ABOVE £5.50 ea

'AN' WASHERS

CADNIUM PLATED STEEL WASHERS THAT ARE 1/16” (STANDARD) & 1/32” (LIGHT) THICK. IDEAL FOR USE WITH NAS BOLTS, 2 STANDARD WASHERS ADDS ‘2’ TO GRIP LENGTH AND 2 LIGHT WASHERS ADDS ‘1’ TO GRIP LENGTH.

MIN QUANTITY 10 OFF (PRICES PER 10)

DIAMETER	L-LIGHT PRICE £	S-STD PRICE £
3/16	0.25	0.35
¼	0.27	0.45
5/16	0.27	0.45
3/8	0.35	0.55
7/16	0.50	0.70
½	0.55	0.80
5/8	1.00	1.60

SMALL DIAMETER WASHER KIT (210 PIECES)

CONTAINS 20 OFF 3/16, ¼, 5/16, 3/8, AND 7/16 AN WASHERS IN STANDARD AND LIGHT. PLUS 10 OFF 3/16 (10-32) COUNTER SUNK TINNERMAN WASHERS.

£12.00 PER KIT

LARGE DIAMETER WASHER KIT (170 PIECES)

CONTAINS 20 OFF 5/16, 3/8, 7/16 AND 10 OFF ½ AND 5/8 AN WASHERS IN STANDARD AND LIGHT. PLUS 10 OFF ¼ COUNTER SUNK TINNERMAN WASHERS.

£15 PER KIT

TINNERMAN (COUNTERSUNK) WASHERS

¼” £0.30 ea

10-32 £0.20 ea

8-32 WITH CAPTIVE 1" LONG SCREW £0.30 ea

LEFT HANDED TAPS

UNF		METRIC COARSE (most common) ALL other sizes available
3/16	£11.50	M5x0.9	£14.00
1/4	£12.00	M6x1.00	£14.00
5/16	£12.00	M8x1.25	£15.00
3/8	£14.00	M10x1.5	£16.00
7/16	£15.50	M12x1.75	£19.00
1/2	£16.50	M14x2.0	£23.00
5/8	£24.00	M16x2.0	£27.00

LAMBDA BOSSES,PLUGS, SENSORS & READOUTS

STEEL LAMBDA BOSSES AND PLUGS SUPPLIED AS A SET WITH COPPER WASHERS

Essential to accurately check your air fuel ratio or insert a permanent lambda sensor in your exhaust

£6.00 each

POP RIVETS

SIZE RANGE 3/32" (TO SUIT NUTPLATES) TO 3/16" IN MANY GRIP LENGTHS AND IN VARIATIONS SUCH AS SEALED END AND COUNTERSUNK HEAD. ALL AVAILABLE SINGLY AT £0.05 EA OR CHEAPER IN QUANTITIES

WHEEL BEARINGS

NEW High Quality Pattern 633007C WHEEL BEARINGS FOR FORMULA VAUXHALL LOTUS AND FORMULA 3 REYNARDS FROM 1985 TO 1991 & DALLARA F3 CARS TO 1998

PRICE £75.00 + VAT each, plus quantity discounts for 10 or more.

GEARCHANGE CABLES

GEARCHANGE CABLES SUPPLIED TO ANY SPECIFICATION. Tell us what length you require and type of ends fitted and we will do the rest, not as expensive as you might think ! A typical 60" cable with 6mm threaded ends, 16mm bulkhead fittings & 50mm travel will cost around £48.00 - plus delivery in around 48 hours for popular sizes.

Items on this page are not available in or on-line shop, please phone free on 0800 8250824 to order or Contact us

Face Seal Style (Series: RS)

THREADED INSERTS

Weldable "Thread Bungs" (Series: WTF)

ADJUSTABLE LINKS

Hex Bar Turnbuckles, Aluminum (Series: AHT)

Stainless Steel Rod (Series: SSR)

WORKSHOP / TOOL BOX KITS OF K-NUTS

NAS BOLTS

'AN' WASHERS

SMALL DIAMETER WASHER KIT (210 PIECES)

CONTAINS 20 OFF 3/16, ¼, 5/16, 3/8, AND 7/16 AN WASHERS IN STANDARD AND LIGHT. PLUS 10 OFF 3/16 (10-32) COUNTER SUNK TINNERMAN WASHERS. £12.00 PER KIT

LARGE DIAMETER WASHER KIT (170 PIECES)

TINNERMAN (COUNTERSUNK) WASHERS

POP RIVETS

WHEEL BEARINGS

Back to Top

CONTAINS 20 OFF 3/16, ¼, 5/16, 3/8, AND 7/16 AN WASHERS IN STANDARD AND LIGHT. PLUS 10 OFF 3/16 (10-32) COUNTER SUNK TINNERMAN WASHERS.

£12.00 PER KIT